Peavey - DPM 4

Below are all the different types of Peavey. Select the device of your choice, to download the manual

Contents

DPM 4 Memory Board Installation Instructions Note This product should only be installed by a n authorized Peavey Dealer or authorized Peavey Service Center to ensure preservation of warranty 1 Save all programs effects sequences and wave samples before proceeding 2 Initialize the memory press and hold the Save Multi on the DPM 3 button and then press the Pause button You will be asked if you really want to initialize Press Enter to initialize 3 Turn the unit off and disconnect it from the AC mains power unplug it from the wall On a flat protected working surface static free turn the unit over on its front panel You will need a Phillips head screwdriver to remove the two screws holding the front panel down and the twelve screws holding the keybed ...